SteveZilla Posted June 7, 2006 Report Share Posted June 7, 2006 I want to build caltrops for a Fantasy Hero game, yet cannot find a write-up for them anywhere. Personally, I am thinking that it's probably just a Drain on Running and Leaping, with appropriate limitations (only vs ground targets, only targets using legs & feet, etc.). I would think that the damage & pain they cause can be just the F/X of the Drain. If I went with the drain, I would add a limitation (Can be Healed), as a healing effect would get rid of some/all of the "wounds" caused by the caltrops. But if someone has a better idea of what base power(s) to use, I'm all ears! Also, "they" are IMO a recoverable focus, that affects an area, and "attack" anybody entering or moving through the area. But I'm not sure of the combination of advantages to get the "attacks people entering/moving", and having a duration only limited by when they get picked up/swept aside. Takers, anybody? The first 100 I manufacture will be free to you, with only a small fee to cover S/H! Quote Link to comment Share on other sites More sharing options...
Steve Long Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops See UMA 183, under "Tetsubishi." Same info's in the HS Equipment Guide. Quote Link to comment Share on other sites More sharing options...
Bloodstone Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops I would make it an 1 pip HKA with the drain linked to it, with the limitation that the HKA must do body for the rdrain to take effect. Similar to how most venoms are written up. After all, there is no reason why Superman or some havily armored dude would suffer from the Running Drain the same as somone that was walking around barefoot or in soft shoes. As for the advantages you need, I think you would want: Uncontrolled and AoE (Radius or Any Shape) Limitations should be: OAF (bag o caltrops), Range Based on STR ( so you can throw them, preferably behind you), only vs characters on the ground, 1 Recoverable charge, and probably Activation Roll 15- (since there is a chance that a target may not actully step on one). Quote Link to comment Share on other sites More sharing options...
Bloodstone Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops for the record, the writeup in UMA is probably much more complete then what I just cobbled together I, for example, completely forgot to add Continuous... :: slaps forhead :: Quote Link to comment Share on other sites More sharing options...
Alibear Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Point of clarification. When you say 'linked to it' you don't mean the limitation 'linked' do you? I'm guessing you mean 'Caltrops must do body or drain doesn't work'. (-1) for such a small attack perhaps? Quote Link to comment Share on other sites More sharing options...
Bloodstone Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Well, you could easily make it a bigger attack (to represent the fact that the opponent probably steps on more then one caltrop), but yes the drain would take linked (-1/4), but then would also have the "HKA must do body" type limitation that you build poisons and such with, since obviously it's not goign to slow you down any if it doesn't hurt you. I believe that limitation is usually valued around -1/2. So two seperate limitations totaling -3/4, in addition to what I mentioned above. Quote Link to comment Share on other sites More sharing options...
Rapier Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops I would make it an 1 pip HKA with the drain linked to it' date=' with the limitation that the HKA must do body for the rdrain to take effect. Similar to how most venoms are written up. After all, there is no reason why Superman or some havily armored dude would suffer from the Running Drain the same as somone that was walking around barefoot or in soft shoes.[/quote'] That would certainly work. However, I would more likely skip the drain and just go with a SFX 1/2 movement. It moves things along quite a bit faster and is appropriate. Quote Link to comment Share on other sites More sharing options...
CourtFool Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Change Environment also allows you to reduce movement if I remember correctly. I believe you could build it to do a pip of damange and reduce movement. Quote Link to comment Share on other sites More sharing options...
Bloodstone Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Alright, somone has invoked a hand waive and somone else has mentioned change environment. Inertia demands that any second now somone will post to do it as a summon or a transform Quote Link to comment Share on other sites More sharing options...
CourtFool Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Inertia demands that any second now somone will post to do it as a summon or a transform PRE attack? You only need enough to make your opponent loose a half phase. Quote Link to comment Share on other sites More sharing options...
mattingly Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Or Mind Control; Based On CON, Set Effect ("Limp"). Quote Link to comment Share on other sites More sharing options...
Rapier Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Alright' date=' somone has invoked a hand waive and somone else has mentioned change environment.[/quote'] Moi? I wouldn't even consider calling that a finger-wave, let along a hand-wave. Not all effects have to be written up as Drain, Suppress or Transform. If you step on a caltrop, I don't need a linked Drain Ground Movement...it's pretty understood. I don't need a Transform Non-Bleeding to Bleeding linked to my Sword. I don't need a linked Mental Transform Conscious to Unconscious (Only if target falls below 0 STUN) on all attacks. In fact, I think my suggestion is a lot more true to the genre. The 1/2 Movement is gone when the foot wound is healed. I don't need to play around with fade rates or heal conditions or stack on -8 worth of limitations. Sorry if this is attacky-ish. Not my intent. I was just a little shocked that someone might consider and arbitrary 1/2 movement a handwave. Quote Link to comment Share on other sites More sharing options...
pinecone Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops You can easily do it as a KA that does disable strikes and only works if stepped or fallen on...if you move carfully you can avoid it otherwise you run the risk of a disabling hit to your foot.....a change enviro, that does damage and requires a DX roll would work just fine also....caltrops are for the most part meant to slow oponite, not harm them.... Quote Link to comment Share on other sites More sharing options...
gojira Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops XDM, UAA, to a dimension where the enemy's speed is reduced, and he has a caltrop stuck in his foot. Quote Link to comment Share on other sites More sharing options...
CrosshairCollie Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Sorry if this is attacky-ish. Not my intent. I was just a little shocked that someone might consider and arbitrary 1/2 movement a handwave. I'm not sure I'd call it a hand-wave, per se, but I think that halving someone's movement is far too effective to give it away for free as a Special Effect. Quote Link to comment Share on other sites More sharing options...
Rapier Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops I'm not sure I'd call it a hand-wave' date=' per se, but I think that halving someone's movement is far too effective to give it away for free as a Special Effect.[/quote'] I can buy that. I've got a bunch of crits I use and some of those effects are 1/2 movement and such, so I've got no problems with that aspect. Eh. Six of one.... Quote Link to comment Share on other sites More sharing options...
SirViss Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops Or Mind Control; Based On CON' date=' Set Effect ("Limp"). [/quote'] I didn't think Caltrops could affect you in... that way. Do you use a poison on them? What? Quote Link to comment Share on other sites More sharing options...
Ockham's Spoon Posted June 7, 2006 Report Share Posted June 7, 2006 Re: How do I build: Caltrops How about skipping the Change Environment, etc. and just change the Activation limitation on the killing attack? Do it like a skill vs. skill roll where the caltrop "skill roll" is the 14- Activation and the character skill roll is a DEX roll (this should be worth a bigger limitation, say -1 instead of -½). But the character can only make a DEX roll as a half PHA action here, so he can only effectively go at half speed while trying to avoid the caltrops. If he has enough armor he doesn't care, he can go through at full speed. This way high DEX people have an easier time avoiding the caltrops as well, which makes sense. _________________________________________________________ "Uh, Joel, what is Ator sitting on?" - Crow T. Robot comments on "Cave Dwellers" Quote Link to comment Share on other sites More sharing options...
Alibear Posted June 8, 2006 Report Share Posted June 8, 2006 Re: How do I build: Caltrops I think the point was that some people would not be effected by pesky little caltrops because they would not pierce the skin is still valid. Would the Hulk really need to make a desk roll to avoid being slowed down? Quote Link to comment Share on other sites More sharing options...
Ockham's Spoon Posted June 8, 2006 Report Share Posted June 8, 2006 Re: How do I build: Caltrops I think the point was that some people would not be effected by pesky little caltrops because they would not pierce the skin is still valid. Would the Hulk really need to make a desk roll to avoid being slowed down? Exactly. Of course the Hulk does not need the DEX roll because he is too tough to be affected, so he goes through at full speed, stepping on the caltrops as he goes but not being hurt because the damage is too small. But if Tarzan is running through the caltrops, he can either go through at full speed and have a the Activation 14- chance stepping on one and being injured, or he can take a half PHA to make a DEX vs. Activation roll to try avoid them. But if he takes a half PHA for the DEX roll, he can only make a half move so he isn't at full speed anymore. _________________________________________________________ "Looks like he stepped in some Trumpy dumpy." - Tom Servo from the Pod People Quote Link to comment Share on other sites More sharing options...
prestidigitator Posted June 9, 2006 Report Share Posted June 9, 2006 Re: How do I build: Caltrops How about something like: RKA: 2d6; [30 Base] Continuous (+1); Reduced End: 0 End (+1/2); Uncontrolled: Turned off by being swept or washed away (+1/2); Area of Effect: Any 9-hex Area, 2D (+3/4); [112 Active] Focus: IAF, expendable and easy to obtain (-1/2); Fuel Charges: 4, area-based (-3/4); Only Affects Weight-Bearing Locations (e.g. the Feet; -1/2); Not Against Targets with Metal or 2cm Thick Protection (-1/2); [34 Real] And use this as an excuse to use a particular Hit Location and Imparing rules even in a campaign where they usually aren't used. (The Fuel Charges are to represent that you can use parts of the AoE and save the remainder for later.) Quote Link to comment Share on other sites More sharing options...
tesuji Posted June 9, 2006 Report Share Posted June 9, 2006 Re: How do I build: Caltrops I am fairly sure that ependable means when you use the charge it goes away, ie they are consumed when you set the power like material components for a spell. Ca,trops can be recovered and aren't expended. i would run with recoverable charges and a trigger. On the subject of the slo down effect of caltrops... it really depends on the campaign. Will a sword strike to the arm cause any penalties? Will a fire bolt to the head cause you any longer term penalties than the damage? If not, then i wouldn't see having caltrops halve your movement be consistent with the campaign standards. Quote Link to comment Share on other sites More sharing options...
prestidigitator Posted June 9, 2006 Report Share Posted June 9, 2006 Re: How do I build: Caltrops I am fairly sure that ependable means when you use the charge it goes away' date=' ie they are consumed when you set the power like material components for a spell.[/quote'] The expendability of a Focus really has nothing to do with Charges. They are independent requirements for casting the spell. Anyway, I suppose we could make them Recoverable. Whatever. Quote Link to comment Share on other sites More sharing options...
SteveZilla Posted June 11, 2006 Author Report Share Posted June 11, 2006 Re: How do I build: Caltrops See UMA 183' date=' under "Tetsubishi." Same info's in the HS Equipment Guide.[/quote'] Thanks for the reference! However, I'm reluctant to use that method (a 1d6 RKA), for various reasons: 1. It depends upon the GM using the optional rules for Hit Locations 2. It depends upon the GM using the optional rules for Imparing 3. The 1d6 attack must roll a 6 to impaire a target with 10 or 11 body, and it cannot impare anything with a body stat above 11. (So even if it activates on 14-, there is still a 83% chance it won't slow them down. 4. It's a 1D6 Killing Attack -- the same as a Short Sword! And even using a 1 pip RKA (as the "base" to link a Drain to) seems to be more damange than caltrops should inflict IMO -- if Joe Average happens to step on 10 of them (he's really clumbsy and stupid), he's at zero body. All the above is why I'm favoring a Drain Running with appropriate Advantages & Limitations. It does what Caltrops are (IMO) primarily meant to do -- slow the targets down -- without needing optional rules, and is more reliable than a standard RKA. Quote Link to comment Share on other sites More sharing options...
ghost-angel Posted June 11, 2006 Report Share Posted June 11, 2006 Re: How do I build: Caltrops Thanks for the reference! However, I'm reluctant to use that method (a 1d6 RKA), for various reasons: 1. It depends upon the GM using the optional rules for Hit Locations 2. It depends upon the GM using the optional rules for Imparing 3. The 1d6 attack must roll a 6 to impaire a target with 10 or 11 body, and it cannot impare anything with a body stat above 11. (So even if it activates on 14-, there is still a 83% chance it won't slow them down. 4. It's a 1D6 Killing Attack -- the same as a Short Sword! And even using a 1 pip RKA (as the "base" to link a Drain to) seems to be more damange than caltrops should inflict IMO -- if Joe Average happens to step on 10 of them (he's really clumbsy and stupid), he's at zero body. All the above is why I'm favoring a Drain Running with appropriate Advantages & Limitations. It does what Caltrops are (IMO) primarily meant to do -- slow the targets down -- without needing optional rules, and is more reliable than a standard RKA. 1. no they aren't. The text states in a game where Hit Locations are used they automatically only target location 18. In a game where Hit Locations are not used called shots to hit locations are still allowed, and common sense prevails in that spikes on the floor can't hit you in the head. 2-3. How so? They do 1D6 Damage. In a game without Impairing rules they just hurt a lot. This build is not a build that slows the target down - it is a build that damages the target. 4. The special effect is you step on a lot of little spikes for an overall 1D6 of damage, this is not 1D6 PER caltrop, this is 1D6 for AREA the caltrops occupy. If the primary purpose you wish to use Caltrops for is to slow the target, then this build may not be for you. Or you could rule that a character who ses the Caltrops ahead of time can move through the area at half speed to take no damage. That's your call. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.